Documentation / Start

Design Your First Hardware

New to electronics? Describe the device you want in plain words and design your first circuit board and a 3D-printable case with Trace, then order the board.

You don't need electronics experience to design your first board with Trace. You describe the device you want in plain words, and Trace's assistant picks real parts, draws the schematic, lays out and routes the board, checks it and designs a case for it. It explains each step and asks you when it needs a decision. You review the result before anything is ordered.

This guide uses the Trace app, in the Flow view. If you already design in Altium Designer, KiCad or Autodesk Fusion, see Which Trace is for me? first.

Before you start

  • A Mac with Apple silicon, a Windows 10 or later PC or an x86_64 Linux PC. See Installation.
  • A Trace account. AI features need a plan, credits or the 7-day trial; see Billing and plans. Students can apply for free access; see Education.
  • An idea of what the device should do. It helps to know how it gets power (USB-C, a battery, a wall adapter) and what it connects to.

Design your board

  1. Install Trace and sign in

    Download and install the Trace app, then sign in. Trace opens in Flow.

  2. Describe what you are building

    Press + (New project). Under What are we building?, describe your device by typing or with the microphone, and press Enter. Say what it does, how it is powered and anything it must fit or connect to. For example:

    A small board powered by USB-C with an ESP32, a temperature and humidity
    sensor and a status LED. It should fit in a case about 50 x 40 mm.
    
  3. Answer Trace's questions

    Trace picks real parts, draws the schematic, lays out and routes the board and checks its own work. The Previews panel shows the schematic, the board and the 3D view as it goes. When Trace needs a decision, a question card appears in the chat with the recommended answer marked. If you are not sure, the recommended answer is a good place to start.

  4. Ask about anything you don't understand

    Switch the chat to Ask to ask questions without changing your design, for example "What does U2 do?" or "Why is there a capacitor next to the ESP32?". Ask Trace to simulate the circuit, and it runs the test on your computer and tells you in plain words whether the circuit does what you wanted. See AI modes and Simulation.

  5. Check the design

    Trace runs the electrical rules check (ERC) and design rule check (DRC) and fixes what it can. Ask it to explain anything that is left. Before you order, check the main parts against their datasheets and look over the board in 3D.

  6. Design a case

    Ask for an enclosure, for example "Design a 3D-printed case for this board with a snap-on lid, and leave the USB-C port reachable." Trace Mechanical builds a base and lid around your real board and checks fit, printability and heat. Export STL or 3MF files for your 3D printer's slicer. See Trace Mechanical.

  7. Order the board

    When you are happy with the board, use Send to Manufacturer to send it to PCBWay or Pikkolo Assembly, then pay and follow the order on the web dashboard. Or export Gerber, drill, BOM and placement files for any manufacturer. See One-click manufacturing and Exporting.

What you get

  • A Trace project with the schematic and the board, in standard KiCad files you can open and edit by hand.
  • Case files to 3D-print: STL and 3MF, plus STEP for CAD tools.
  • Manufacturing files, or an order with a manufacturer that you track on the dashboard.

Tips for beginners

  • Start small. One microcontroller, a sensor or two and an LED is a good first board. Add features in later requests.
  • Say what matters. Power source, size limits, connectors you need and parts you already own all help Trace choose well.
  • Use Ask mode to learn. Ask why a part is there, what a check result means or how to test the board when it arrives.
  • Let it run, or stay in the loop. In Flow, Autopilot is on, so Trace keeps going and lists the choices it made at the end. Turn it off to answer each question yourself.
  • Edit by hand when you want to. Switch to the Workbench to see every editor. Your first PCB walks through a small board step by step there.