On Autopilot, the assistant keeps going until your request is done. It makes the design choices itself and lists them for you at the end, instead of stopping to ask along the way. You choose what it may do on its own, and the things that matter most always wait for you.
New in Trace 3.3, in Flow and in the Workbench chat. The Trace Plugin doesn't have Autopilot.
Turn Autopilot on or off
- Beside the message box, press the button that reads Autopilot, Autopilot (custom) or Check with me.
- Under What Trace does without asking, choose Autopilot or Check with me.
- Autopilot: Trace takes the request through to the end and asks you less.
- Check with me: Trace asks before decisions, paid runs and version-control steps, and waits for your answer, as the chat always has.
Autopilot is on by default in Flow and off in the Workbench. Each view remembers its own choice, and every chat in that view follows it.
Choose what Trace does without asking
With Autopilot on, each step has its own switch. The switches apply to Flow and the Workbench alike.
| Switch | On | Off |
|---|---|---|
| Picks real parts and swaps in equivalents | Trace may use an equivalent part, and lists every swap in its summary. | Trace asks before using an equivalent. |
| Installs a part it generates | A part Trace generates installs once it matches the manufacturer's drawing. | You accept each generated part on its card. |
| Starts basic routing | Basic routing starts without its card. Checks and simulations run as often as the work needs, and they are free. | Basic routing waits for you to start it on its card. |
| Saves, commits, and opens and merges pull requests | Workspaces steps go ahead without their review card. Discarding changes and deleting still ask. | Each commit, branch and pull request waits on its card. |
All four are on until you change them. A step you switch off asks you first, as it does with Autopilot off. While any step is off, the button reads Autopilot (custom).
Paid layout runs
Under Paid layout runs, choose the longest advanced layout run Autopilot may start on its own: Always ask, or Up to 5 min, 10, 15 or 30 min. It is 10 minutes until you change it.
- A run within your limit starts without you pressing Run, but only when the checks before it passed and your balance covers it.
- It stops as soon as the board is finished, and its result says Autopilot started it.
- A longer run, or one your balance doesn't cover, shows its card for you to decide, as before.
Advanced runs are charged for the compute time they use; see Billing and plans.
What still waits for you
Autopilot never does these without asking you:
- sharing a project with your team or adding it to Workspaces;
- ordering boards or sending files to a manufacturer;
- deleting your files;
- discarding changes, deleting a branch or closing a pull request;
- spending more than your paid layout run limit.
Questions and cards on Autopilot
- Questions: a question the assistant does ask marks its recommended answer. If no one answers within 3 minutes, Trace goes with that answer and carries on. You can still pick another answer to change it. With Autopilot off, questions wait 5 minutes.
- Generated parts: a part that matches the manufacturer's drawing and passes a second check installs by itself. Its card says Installed on Autopilot and lists any checks that were waived. To take such a part out, delete it from the TraceComponents library in the Symbol and Footprint Editors. A part that could not be checked against the drawing, or that the second check flagged, still waits for you.
- Bill of Materials: the parts list is accepted as Trace drew it, and the card stays in the chat for you to read.
- Cases: a case plan from Trace Mechanical is used as Trace built it. Change it on the Mechanical page, or tell Trace what to change.
When to use it
- Autopilot suits a new design from a description, or a long request you want finished while you do something else. Read the summary at the end: it lists the choices Trace made.
- Check with me suits careful changes to a design you know well, where you want to approve each step.
Either way, review the result before you order a board: check the schematic, run ERC and DRC, and look at the board.