TraceDocs
Get Trace

Reference / Platforms

Footprints Library

Find, download and review PCB footprints against the exact component package.

footprints.buildwithtrace.com helps you find PCB footprints for compatible design tools. Available packages and controls can change; a catalog listing is not a manufacturing approval.

Find and use a footprint

  1. Search the exact package name or component part number.
  2. Compare body size, lead pitch, pad count and package variant.
  3. Inspect the preview and available source information.
  4. Download the .kicad_mod file or use a supported copy control.
  5. Open it in the footprint editor, check dimensions and save it in an appropriate library.
  6. Assign it to the symbol and verify the pin-to-pad mapping in your design.

Copy and download paths can produce different detail. Inspect the actual file or pasted footprint, not just the website preview. A 3D-model reference does not guarantee that its asset is installed or that the assembly fits.

Review before manufacturing

Check the manufacturer's package drawing and your assembly requirements:

  • Pad numbering, pitch, dimensions and orientation.
  • Pin 1, polarity, exposed pad, drills and plated/non-plated holes.
  • Mask and paste openings, courtyard, fabrication and silkscreen.
  • Units, package tolerances and symbol-to-footprint mapping.
  • 3D model position and clearances, where relevant.

An IPC-derived land pattern, automated validation or a clean DRC does not prove every package, solder process or enclosure requirement. Inspect generated manufacturing files too. See Components and Exporting.

Generate a missing footprint

When available, provide the exact package drawing and required dimensions. Preview the generated result and request corrections before saving or installing it. Custom geometry and special assembly requirements may need manual edits.

Generation requires the service's current account access and usage; see Billing and Product availability. Do not assume website generation exposes every native Component Editor control.

Contribute a footprint

Use the site's contribution controls when available. Submit only files you have the right to share, include source/package information and follow the actual license and review terms. Structural validation is not engineering certification or a guarantee that the submission will be published.